10T00 series sleeve single seat control valve

Specification

Valve size: NPS1.5～NPS16 DN40～DN400

Pressure rating: 150LB ~ 600LB, PN16 ~ PN63

Material: carbon steel, stainless steel, duplex steel, alloy steel

Pipe connection: flange, butt welding

Body type: straight-through, angled

Bonnet form: standard, heat sink, low temperature, bellows

Flow characteristics: equal percentage, linear, quick opening

Cut-off grade: ASME B16.104 V (standard metal seat), ASME B16.104 VI (cut-off soft seat)

Applicable temperature: -30 ° C ~ 260 ° C

Quality / Product Certification: ISO 9001, CRN, CUTR, PED

Safety and reliability: in line with SIL

Valve Actuator Options: Pneumatic Membrane Actuator, Pneumatic Piston Actuator, Electric Actuator

Characteristics

It adopts sleeve guiding and pressure balanced valve core, which is suitable for occasions with large pressure difference.

The use of a balanced seal ring instead of the upper seat allows the conventional sleeve double seat valve structure to be changed to a sleeve single seat structure. This improvement greatly increases the leakage level of the sleeve valve.

The valve core utilizes a pressure balanced structure with a small opening and closing force. The high pressure differential can be controlled by a small actuator thrust.

It is widely used in fluid control of medium and low temperature pipelines with good dynamic stability. The sealing performance is good and the pressure difference is allowed to be large.

The sleeve is guided, the guiding area is large, the stability is good, the structure is compact, the valve inner part can be quickly replaced online, the maintenance efficiency is high, labor and time are saved.

The balanced spool construction ensures minimal actuator thrust required.